In-the-wall Heaters
Electric Wall Heaters
Wall heaters are great because they’re easy to install, relatively inexpensive, and provide a steady stream of warmth that can evenly heat a room. Plus, they provide aesthetically pleasing home decorating and significantly less stressful fire risk. Explore the different types of wall heaters and help you decide which one is best for your home.
They are similar to the portable electric heaters you might use in your home or office, except they are permanently installed on the wall. In most cases, no wall demolition is required as they are installed using special brackets. They are installed precisely where you need them; HVAC ductwork is not required. The connection is hardwired directly to your home’s electrical system, so they require an electrical outlet. And because they’re permanently installed, they provide a neater appearance than portable electric heaters. They are much safer than gas heaters as there is no fire or carbon monoxide poisoning risk.
Baseboard Heaters
Like electric wall heaters, baseboard heaters are also powered by electricity. They are placed at the base of the wall, and they work by circulating warm air along the floor. Baseboard heaters are ideal for small rooms or areas that need targeted heat. They are also very effective in rooms with high ceilings as the warm air rises and evenly circulates throughout the room. We use various techniques to install baseboard heaters; the most common is to screw them directly into the wall studs. Another option is to use metal straps that are screwed or nailed into the wall studs.
Cadet Wall Heater
These are some of the most popular electric wall heaters on the market. They are attractive and low-profile heaters that are mounted on the wall or recessed into the wall. The heater comes with a built-in thermostat so you can easily control the temperature. They’re easy to install and safe and come in various styles and sizes to fit any home decor. They offer many features, such as built-in thermostats, remote controls, and energy-saving settings.
King In Wall Heaters
With over 60 years of experience in the heating industry, King is a trusted name for in-wall heaters. Their products are designed for both residential and commercial applications. You can choose from a variety of models depending on your needs. They offer both hardwired and plug-in models and models with or without thermostats. Some of their models also come with a built-in fan to help circulate the warm air.
Average 5-star reviews
Based on 75+ user reviews
Frequently Asked Questions.
You’ll find answers to common questions about our HVAC services. Our aim is to help you understand more about how we can assist with your heating, cooling, and air quality needs.
Cadet heaters take up little space and can be placed just about anywhere. Compared to other heating options, they are very affordable to purchase and run. They are also very safe to use and have minimal risks of injury if they are used as directed by the manufacturer.
Replacing a cadet heater is inexpensive and can be done by either an individual or professional technician. The cost of replacing your cadet heater depends on the type of space you live in. For example, a small apartment will be less expensive to repair than a larger home. Most homeowners spend less than $150 to replace their cadet heaters.
Turn the cadet wall heater power switch off. This should be located at the top of the cadet heater, usually near the front. If you have trouble locating it, refer to your manual for more details on how to turn off your specific model of cadet heater.
Baseboard heating works by using electrical energy to warm up water that is contained in the pipes on the system’s baseboard. The heat from the water travels to the pipes, which are placed in the wall and attached to the floor, warming everything in its path.
Baseboard heating can be replaced just about anywhere. It is typically an easy task for the average homeowner. Below are some of the steps you can use if you wish to replace your baseboard heating:
- First, unplug your baseboard heater and make sure that any cords that are attached to it are unplugged as well. Next, remove the power switch by pulling it out. Using a screw driver, remove any screws or nails holding your baseboard heater to the wall. Inspect the pipe running along your floor underneath the unit and determine how much of its length needs replacing. Mark where this section is located with masking tape or paint so that you can easily deduct how much of it will need replacing.
- Remove the baseboard heating from the wall so that you can replace it. You should have seen a short, white pipe coming out of your wall near where you attached your unit to the wall. This pipe is connected to a length of tubing that runs along your floor and pipes outside through an exhaust vent.
- Follow the directions on each piece of your new baseboard heating and make sure that they are securely connected to each other. Place them back in their designated spot in the room or home. Remove all nails or screws from backplate to ensure that everything is working correctly before replacing them in their proper place on the unit.
Installing an electric baseboard heater is a relatively simple process.
- First, unplug your electric baseboard heater. Unplug any cords that are connected to it and remove the power switch by pulling it out. The power switch should be located near the top of the electric baseboard heater and near the fan or blower unit.
- Place your electric baseboard heater against a wall or in an area that gets lots of heat from sunlight. Be sure to position it so that there is plen full access for electrical wiring and ducting to easily run through the unit. Place it on a level, dry surface so that air can properly circulate around it.
- The electric baseboard heater should be installed away from heat sources and out of the way of any furniture or other items that could cause the unit to tip over. Avoid installing in areas where children and pets have easy access, as this could present significant risks of injury or death.
- Place a level on your electric baseboard heater to ensure it is straight and level before securing it to the wall. This will make sure that air is able to travel around the unit without any obstruction. If necessary, make adjustments to the electric baseboard heater until you have leveled it correctly.
- Secure your electric baseboard heater to the wall with screws or nails. You may need a drill to place holes where screws or nails can be placed. Choose a secure and sturdy location for installation, like a wall stud or beam. Do not choose thin wood or plaster walls as they will likely not be strong enough to support the unit.
- Connect power wiring and ducting to your electric baseboard heater using secure, sturdy connections. Use clips, clamps, screws, or tape to make sure that nothing moves around while in use.
- Turn on your electric baseboard heater and allow it time to warm up before allowing anyone access to the room you are installing it in. Make sure to place furniture and other items back where they were before allowing it to cool again.
- Cleaning your electric baseboard heater can be done with a simple damp cloth or a dry microfiber cloth. Cleaning will ensure that the unit is more efficient, which will reduce your energy use. Cleaning will also prevent any build-up of dust, which could cause your heater to overheat and lead to a fire hazard.
